Mechanical Diamond Grinding
Penetrating Primer Coat
Self-Leveling Slurry Broadcast
Chemical-Resistant Topseal
Diamond grind concrete substrates to achieve a CSP 2 to 3 profile. Vacuum all residual particulate to expose open capillary pores for deep primer penetration.
Apply two-component low-viscosity epoxy primer at 8 mils wet film thickness. Allow deep matrix saturation to consolidate loose friable concrete and seal out vapor.
Sweep excess aggregate after initial cure and squeegee high-solids clear polyaspartic topcoat. Creates an impermeable, non-porous hydrophobic barrier with high tensile adhesion.
Pour the self-leveling matrix and immediately broadcast colored quartz aggregate to saturation. Maintain uniform distribution across wet borders to prevent seam formation.
Environmental Windows
Ambient temperatures must remain between 10°C and 30°C with substrate moisture content below 4 percent measured by calcium chloride testing. Exceeding 85 percent relative humidity risks amine blushing and surface tackiness.
Working pot life decreases by half for every 10°C rise in atmospheric temperature. Mix exclusively in verified 4:1 ratios with low-speed mechanical agitation to prevent trapped micro-bubbles.
Custom Project Formulations
Connect directly with Dura chemical engineers for site-specific moisture mitigation protocols, custom aggregate blends, and verified freight schedules.